Z690 build update

pavel

Limp Gawd
Joined
Apr 8, 2014
Messages
469
Hey,
My system is built - here's an update:

A) I did the washer mod w/ the cpu install - at first, the temps weren't great and I was puzzled - well, had help. The temps in the BIOS - got to about 33 - 35C. I thought it was a bit high. Some peeps told me not to worry about it but I wasn't satisfied.

B) My bro gave me two 140mm fans he didn't need/couldn't use - Arctic P14s - so, I added these to the front and moved the stock fan to the top. This is all in a Phanteks P500A - non-RGB version - came with 2 stock fans. Windows 10 Pro is installed. Temps improved - see #D

C) nvme pcie 3.0 1tb SSD - is the OS drive - I wanted a pcie 4.0 drive but it was on sale so I bought it. SN570.

D) Temps improved - most of the cores are in the high teens - low 20s - e.g. 20, 21. I am using Core Temp - installed that and Open Hardware Monitor and one other program. I couldn't find the temps on that for some reason. Edit: this is running at idle/stock speeds. I guess I should try a program that stresses the cpu a bit - to really see if the mod and cooler are a good match here.

E) Other hardware: EVGA RTX 3060, Asus Z690 Tuf Gaming Wifi DDR4, Team Group 64GB DDR4, Corsair RM850x psu, Be Quiet Dark Rock Pro 4 (I hate tall, ai, cpu coolers - it was probably the most frustrating/annoying aspect of the build) - but, I guess it's doing its job. I hope/plan to replace with a liquid cooler at some point down the line. Hopefully.
 

Niner21

Gawd
Joined
Aug 26, 2018
Messages
684
Those temps seem fine to me. My 360mm AIO idles about the same temps you are seeing, and maybe a little less. I have not done any mods to my set up so I am just running the stock Lotes mechanism on my Asus board.
 
Last edited:

chameleoneel

Supreme [H]ardness
Joined
Aug 15, 2005
Messages
6,646
Hey,
My system is built - here's an update:

A) I did the washer mod w/ the cpu install - at first, the temps weren't great and I was puzzled - well, had help. The temps in the BIOS - got to about 33 - 35C. I thought it was a bit high. Some peeps told me not to worry about it but I wasn't satisfied.

B) My bro gave me two 140mm fans he didn't need/couldn't use - Arctic P14s - so, I added these to the front and moved the stock fan to the top. This is all in a Phanteks P500A - non-RGB version - came with 2 stock fans. Windows 10 Pro is installed. Temps improved - see #D

C) nvme pcie 3.0 1tb SSD - is the OS drive - I wanted a pcie 4.0 drive but it was on sale so I bought it. SN570.

D) Temps improved - most of the cores are in the high teens - low 20s - e.g. 20, 21. I am using Core Temp - installed that and Open Hardware Monitor and one other program. I couldn't find the temps on that for some reason. Edit: this is running at idle/stock speeds. I guess I should try a program that stresses the cpu a bit - to really see if the mod and cooler are a good match here.

E) Other hardware: EVGA RTX 3060, Asus Z690 Tuf Gaming Wifi DDR4, Team Group 64GB DDR4, Corsair RM850x psu, Be Quiet Dark Rock Pro 4 (I hate tall, ai, cpu coolers - it was probably the most frustrating/annoying aspect of the build) - but, I guess it's doing its job. I hope/plan to replace with a liquid cooler at some point down the line. Hopefully.
That's about as low as it gets for an idle temp in the bios.
 
Top