Recent content by bal3wolf

  1. B

    thermatake core x71 door modding

    came outdecent heres a pic before i put a 200mm fan on the door my temps are great now reversed my front and bottom fans back to intake have the door 200mm fan as intake and top and back exhaust.
  2. B

    thermatake core x71 door modding

    seemns like it my water temp is staying at 25c with room at 20c i still have a 200m fan coming im going to mount on the side to keep cool air coming in.
  3. B

    thermatake core x71 door modding

    well i got my mod done other then putting a fan in later it turned out decent i guess old case showing its age.
  4. B

    thermatake core x71 door modding

    yea i guess im kinda bored lol laid up with a bad back so looking for simple things to do that could improve my already decent temps lol.
  5. B

    thermatake core x71 door modding

    nice i was searching but using wrong words i found this i think will work and be pretty cheap to use i orderd the mesh below its large enough i wont have to cut it should be able to lay it out and fit it pretty nice without it looking to crappy...
  6. B

    thermatake core x71 door modding

    yea door is side sorry i got a pretty bad cold so minds not working correctly with little sleep i been getting. I switched to a all exhaust but 1 because my rigs mines 24/7 on the gpu and couple a hrs a day my cpu gets hammerd so tons of heat i found with front as intake and top as exhaust over...
  7. B

    thermatake core x71 door modding

    Hello i been thinking of maybe modding my case for awhile right now i have a top 360mm rad set as exhaust a front 420mm set as exhaust and a bottom right 360mm set as exhaust and a back fan set as intake. My temps arent bad mining 27-32c and gaming 37c-42c with card running at 2100Mhz on core...
  8. B

    Which monitor manufacture is good?

    Been happy with my LG ultra gear 4k but i have only owned it about 6 months i can say asus and Aoc have been good for me in the past 5+ years on each without any issues.
  9. B

    RTX 3090 [H] Owner's Official 3DMark Time Spy Leaderboard

    Got a new high some wierd issues i been having tho with either windows 11 or newest msi ab my card has been boosting to high causing crashes i had to dial back my normal oc to make it run same clocks as before. 22 688 https://www.3dmark.com/3dm/68846919?
  10. B

    Win 11 L3 AIDA64

    latency on windows 11 still aint fixed i see wierd stuff also vs windows 10 but does not bother me really games seem to run good and os responds really fast everything opens in a snap and boots up faster then my 10 did.
  11. B

    Thinking of changing my MB

    When i first setup my x570 rig last year with a 3900x i was having wierd issues sometimes no post unless i cleared cmos or flashed the bios what ended up fixing it for me was pulling cpu out and putting it back in not sure why but that fixed it and even now with my 5950x no issues.
  12. B

    Just ordered a 5900x and Asus Dark Hero VIII x570s

    nice i guess i was sorta luckly my 3900x and 5950x both ran 1900.
  13. B

    Just ordered a 5900x and Asus Dark Hero VIII x570s

    should be very happy with that cpu i went from a 3900x to a 5950x my 3900x maxed out at 4.4Ghz im able to hit 4.75/4.65Ghz on my new 5950x and after i got a TechN water block to replace my subpar ek one and did some work on my fans im staying under 75c in cb23 now can run 3800/1900 Memory...
  14. B

    What max coolant temp should I be targeting?

    Im not 100% sure how much heat im dumping into the loop the 5950x iv seen use up to 270Watts of power and gaming the 3090 kingpin will go up to 520 watts and then i have the mp5works active back plate cooler on it also so i figure i could be dumping 600-1000 watts of heat into the rads im...
  15. B

    What max coolant temp should I be targeting?

    I cant run with side panel off 24/7 i don't sensitive hearing but will give it a shot i tune my fans to a noise profile i can handle and my german shepard is kinda noisey shes tryings to see what the computer looks like lol. But i took side panel off to check air flow on the new fan and panels...
Top