Arduino: 1.8.13 (Windows 10), Board: "Sanguino, ATmega1284 or ATmega1284P (16 MHz)"

Sketch uses 125350 bytes (96%) of program storage space. Maximum is 130048 bytes.

Global variables use 6849 bytes (41%) of dynamic memory, leaving 9535 bytes for local variables. Maximum is 16384 bytes.

C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude -CC:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf -v -patmega1284p -carduino -PCOM9 -b115200 -D -Uflash:w:C:\Users\julian\AppData\Local\Temp\arduino_build_556884/Marlin.ino.hex:i 



avrdude: Version 6.3-20190619

         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

         Copyright (c) 2007-2014 Joerg Wunsch



         System wide configuration file is "C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf"



         Using Port                    : COM9

         Using Programmer              : arduino

         Overriding Baud Rate          : 115200

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xe4

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xe4

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xe4

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xe4

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xe4

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xe4

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xe4

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xe4

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xe4

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xe4



avrdude done.  Thank you.



Problem uploading to board.  See http://www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.



This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.