Intel(R) MEManuf Version: 11.6.10.1198 Copyright(C) 2005 - 2016, Intel Corporation. All rights reserved. FW Status Register1: 0x94000245 FW Status Register2: 0x00F60506 FW Status Register3: 0x00000420 FW Status Register4: 0x00084400 FW Status Register5: 0x00000000 FW Status Register6: 0x40000000 CurrentState: Normal ManufacturingMode: Disabled FlashPartition: Valid OperationalState: CM0 with UMA InitComplete: Complete BUPLoadState: Success ErrorCode: No Error ModeOfOperation: Normal SPI Flash Log: Not Present Phase: ROM/Preboot ICC: Valid OEM data, ICC programmed ME File System Corrupted: No PhaseStatus: AFTER_SRAM_INIT FPF and ME Config Status: Match FW Capabilities value is 0x31111540 Feature enablement is 0x11111140 Platform type is 0x71220322 No Intel Wireless device was found Feature enablement is 0x11111140 ME initialization state valid ME operation mode valid Current operation state valid ME error state valid OEM ICC data valid and programmed correctly MFS is not corrupted PCH SKU Emulation is correct FPF and ME Config values matched Request Intel(R) ME BIST status command... done Get Intel(R) ME test data command... done Get Intel(R) ME test data command... done Total of 11 Intel(R) ME test result retrieved Policy Kernel - Boot Guard : Self Test - Passed MCA - MCA Tests : Blob - Passed MCA - MCA Tests : MCA Manuf - Passed SMBus - SMBus : Read byte - Passed VDM - General : VDM engine - Passed PAVP - General : Verify Edp and Lspcon Configurations - Passed PAVP - General : Set Lspcon Port - Passed PAVP - General : Set Edp Port - Passed Policy Kernel - ME Configuration : M3 Power Rails Available - Passed Clear Intel(R) ME test data command... done MEManuf Operation Passed